Lift for worktop, manually height adjustable

EAN 5708590292786
HMI 54802

RK1113

Lifts for kitchen worktop, wall-mounted

Lift for worktop, manually height adjustable

The name INDIVO relates to the individual configuration of the products.

Manual lift for worktop
Lift for worktop, with a crank handle
Including 4 brackets
Lengths from 2001-2400 mm.
Height adjustable 300 mm.
Incl. mounting kit for brick wall.
Please state desired length when ordering

INDIVO lifts may be used with most commercially available kitchen worktops and kitchen cupboards, allowing them to be adjusted in height so the kitchen can be used by both seated and standing people.
Expected service life for the INDIVO lifting units is 10 years.

Material:
Telescopic leg: Aluminium, ABS plastic
Cross braces: Aluminium
Brackets: Steel
Crank handle: Steel
Surface treatment:
Brackets: Powder lacquered (grey RAL 9006)

Kitchen worktops which can be adjusted in heightusing a crank handle are the budget solution forkitchens catering to both seated and standing users.
These are most commonly used in kitchens which do notrequire frequent, daily adjustment.

Manual lifts are adjusted in height using a crank handle.
They can be used with worktops, with or without an edge.
The crank handle socket can be positioned anywhere along the front edge, except under a sink or hob.
Lifts can be adapted to most standard kitchen components.
Lifts are available for worktops of any length between 600 mm and 3000 mm.
Height adjustable 300 mm.

Maximum load (evenly distributed):
100 kg including worktop.

Height adjustable

pcs

29.877 kg

31.2 kg

31.2 kg

99999

1

99999

INDIVO lift for kitchen worktop.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+

NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.

Pressalit makes a commitment to remedy material and manufacturing defects for a period of three years from the invoicing date.