PLUS wall track, 15.7'', left-grooved, for vertical mounting

GTIN-13 5708590369280
ETIM EC010050
HMI 124111
NRF 7501072
VVS 615843134
EAN 5708590369280

R9873112

R9863

Wall tracks

PLUS wall track, 15.7'', left-grooved, for vertical mounting

Below a selection of products for fitting to the wall track.

PLUS wall track, 15.7'', left-grooved, for vertical mounting.
For height adjustable, left-hand operated support arms.
The cover plate hides bolts and wires and facilitates cleaning.
Materials: Aluminium and polystyrene.
Excl. fixing kit.

Excl. mounting kit. See Technical specifications (pdf) for information on mounting kits suitable for various wall types.

Anthracite gray

Rasmus Thygesen

2011

The wall track is primarily made of 10-micrometer anodized aluminium. The cover plate is made of polystyrene and the ends of the track are capped with ABS polymer.

The vertical track enables height adjustment of the different products. If combined with the horizontal track, the available space in the bathroom can be utilized optimally. In environments with multiple users, the vertical track makes it possible to adjust the different products to individual user heights.

The front cover plate conceals mounting bolts and any cables.

Fixed mounting

pcs

2.2 lbs

2.58 lbs

2.58 lbs

150

1

150

This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
CaviCide

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that water deposits (Calcium, lime etc.) be removed from wall tracks and other aluminum parts using a solution of three parts of 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts should be wiped over with a damp cloth wrung out in plain water.

This product fulfils all relevant requirements in European Regulation (EU) 2017/745 on medical devices in risk class I. This product is considered to be an accessory for a medical device, as it is not itself a medical device, but is intended to be used together with several particular medical devices to specifically enable the medical devices to be used in accordance with their intended purposes.

Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.