PLUS shower seat 450 with aperture, manually height adjustable

EAN 5708590359748
ETIM EC010872
FDA INN/D135865
GMDN 34936
HMI 124344
NRF 6317121
UNSPSC 42211610
VVS 777515612

R7425112

R7421, R7167

Shower seats

PLUS shower seat 450 with aperture, manually height adjustable

PLUS shower seats are offered in a number of colours. They are available as both fixed height, electrically adjustable and manually adjustable, with and without aperture, and with an option of back and armrests.
They are suitable for wall-mounting or for fitting to Pressalit PLUS wall tracks.

PLUS shower seat 450 with aperture, with backrest. Manually height adjustable by 380 mm, without the use of tools. The seat is foldable.
Materials: Comfortable polyurethane foam over a plywood core, fitted to an aluminium profile.
Excl. mounting kit.
Replaces R7421

Excl. mounting kit. See Technical datasheet (pdf) for information on mounting kits suitable for various wall types.

Anthracite grey

The shower seat is used to sit on during showering.
Expected service life of the shower seat is 10 years, provided that maintenance is carried out as described in the instructions for use (OMM).

Rasmus Thygesen

2011

The shower seat is made of polyurethane (PU) foam with a plywood core and this is covered with an in-mould coated surface that is protected using a clear PU lacquer. The backrest is made of polyurethane (PU) foam protected using a clear PU lacquer. Internal components and fasteners are primarily made of stainless steel. The hinge barrel is capped with ABS.

Ergonomically designed seat - contact surface are 450 x 437 mm. Soft and slip-resistant material that has a warm feel.

The seat can fold up when not in use or to maximise floor space. The seat and backrest can be adjusted simultaneously thanks to a safe and easy click system.

Maximum user mass: 200 kg.
When the seat is loaded with 200 kg, each wall fastener is loaded with 24 kg.

The seat has been tested statically with safety factor 1.5, which is a requirement according to the applied assistive products standards.

Height adjustable

380 mm

200 kg

200 kg

pcs

12.14 kg

14.28 kg

14.28 kg

6

1

6

PLUS shower seat
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
Erisan OXY+
Tvättsprit 70%
CaviCide surface disinfectant decontaminant cleaner
Rodalon Desinfektionsspray
Terralin protect (SCHÜLKE+)
Dismonzon Plus (BODE Chemie GmbH)

NON-DISINFECTANTS:
Wetrok Caledor (Wetrok)
Petrosol Citro (Büfa)

Important: Polyurethane surfaces of PLUS shower seats and PLUS backrests contains an antibacterial surface, which will be compromised if cleaned with anything other than soap and water.

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.

CE MDR This product is in compliance with all relevant requirements of: - Regulation (EU) 2017/745 on medical devices.

Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.