Rehabilitation facility
Highlights
Products in this suggestion
16 products included
Specifications for Vent kit
GTIN-13 5708590239293
ETIM EC010195
NBS N13:30,335
NRF 6132521
VVS 747472900
EAN 5708590239293
ETIM EC010195
NBS N13:30,335
NRF 6132521
VVS 747472900
EAN 5708590239293
Item number
R2059
Product group
Flexible feed and waste systems
Product
Vent kit
Product description
Air relief kit for waste system
Description
Air relief kit for waste system
Sales unit
pcs
Weight
0.71 lbs
Gross weight
0.96 lbs
Weight per crate
0.96 lbs
Crates per pallet
100
Qty per crate
1
Qty per pallet
100
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Toilet seat Dania with cover
GTIN-13 5708590315966
ETIM EC011526
HMI 108574
NBS N13:300
NRF 6190607
UNSPSC 42211614
VVS 615679000
EAN 5708590315966
ETIM EC011526
HMI 108574
NBS N13:300
NRF 6190607
UNSPSC 42211614
VVS 615679000
EAN 5708590315966
Item number
R37000-D92999
Product group
Toilet seats
Product
Toilet seat Dania with cover
Product description
Toilet seat, Dania, with stabilizing buffers, with cover. With extra strong cross-bar hinge.
Description
Toilet seat, Dania, with stabilizing buffers, with cover. With extra strong cross-bar hinge.
Color
White
Materials
Seat/cover: Thermoset plastic (urea)
Strap: Stainless steel V2A
Strap: Stainless steel V2A
Ergonomy
An ergonomically designed toilet seat suitable for most people. Sideways transfer is easy because the seat is flat. The cover is comfortable to sit on, and when set in the upright position it provides good back support.
Product capacity
This product has been tested statically up to 825 lbs. As the European standard for technical aids for disabled, EN 12182:2012, requires a static test with safety factor 1.5, the nominal maximum load for this product is therefore 550 lbs.
Dimensioned drawing, inch
Hinge model
D92
Hinge drawing
Mounting
Bottom mounted
Sales unit
pcs
Weight
8.28 lbs
Carton size
457x389x68 mm
Gross weight
9.39 lbs
Weight per crate
46.93 lbs
Crates per pallet
18
Qty per crate
5
Qty per pallet
90
Cleaning
Use a mild soap solution to clean the toilet seat. Please take care that the seat and hinges are not left damp. For disinfecting the seat, e.g. ethanol 85% can be used. Make sure that the product is wiped down with a soft rag wrung out in clear water and dried off with a soft, dry cloth immediately after disinfection. Avoid contact of the seat and hinges with abrasive, corrosive or chlorine-based cleaners, as these may cause damage or lead to flash rust. Therefore, when cleaning the bowl, make sure that the seat and cover are kept in an upright position until all cleaning agent has been flushed away.
Warranty
Your Pressalit toilet seat is subject to a 10-year product warranty against presentation of receipt. You should contact the dealer or store where you purchased the seat in the event of a complaint. In the event of complaints about defective materials and/or manufacturing defects and/or functional limitations ascertained within a 10-year period, following proper use and cleaning of the toilet seat (we reserve the right to examine the toilet seat at our factory), Pressalit will deliver spare parts or replace the toilet seat by an identical or similar model. If the color is no longer available, Pressalit reserves its right to replace the toilet seat by a similar model in the color white. Upon replacement or delivery of a spare part, the warranty period will not be extended nor renewed. If replacement is not possible, Pressalit may instead refund the purchase price.
Subject to changes in the product range, technical changes and printing errors.
Product fits
Manufacturer
Bowl
IFÖ Sanitär AB
Sign
Spira
Spira, høj , lukket S-lås, rimfree
Cera væghængt
Spira
Spira, høj , lukket S-lås, rimfree
Cera væghængt
Laufen AG
Pro-N
Moderna R Rimfree
Moderna R Rimfree
Gustavsberg (V & B)
Nautic
Saval Pro
Saval Pro
Villeroy & Boch
O.novo Vita
O.Novo rimfree
Omnia Classic
O.Novo rimfree
Omnia Classic
LAUFEN CZ s. r. o.
Deep by Jika New
Grohe A/S
Bau Ceramic
VITRA
Matrix
Pressalit A/S
O.Novo ny skyllekant
R2099
R2099
Sparepart drawing
Specifications for PLUS wall track, 47.2"
GTIN-13 5708590305776
ETIM EC010050
HMI 71741
NRF 7501015
VVS 615841112
EAN 5708590305776
ETIM EC010050
HMI 71741
NRF 7501015
VVS 615841112
EAN 5708590305776
Item number
R9812112
Previous version
R9903
Product group
Wall tracks
Product
PLUS wall track, 47.2"
Product description
PLUS wall tracks are used for mounting of support arms, shower seats and sink brackets, and allows sideways adjustment of these products.
See below a selection of products for fitting to the wall track.
See below a selection of products for fitting to the wall track.
Description
PLUS wall track, 47.2", for horizontal mounting.
The cover plate hides bolts, wires and simplifies cleaning.
Materials: Aluminium and polystyrene.
Excl. mounting kit.
The cover plate hides bolts, wires and simplifies cleaning.
Materials: Aluminium and polystyrene.
Excl. mounting kit.
Color
Anthracite gray
Designer
Rasmus Thygesen
Design year
2011
Materials
The wall track is primarily made of 10-micrometer anodized aluminium. The cover plate is made of polystyrene and the ends of the track are capped with ABS polymer.
Ergonomy
The track distributes the weight of the individual bathroom product, for example a sink bracket, along its entire length. The products can be adjusted and locked on to the track with intuitive locking functions.
Features
The horizontal track makes it possible to shift the product along the wall to generate extra space as needed. The front cover plate conceals mounting bolts and any cables.
Product capacity
Maximum load: Up to 2200 lbs. depending on the wall type.
Dimensioned drawing, inch
Adjustability
Fixed mounting
Sales unit
pcs
Weight
6.46 lbs
Gross weight
7.22 lbs
Weight per crate
7.22 lbs
Qty per crate
1
Qty per pallet
0
Cleaning
This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
CaviCide
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that water deposits (Calcium, lime etc.) be removed from wall tracks and other aluminum parts using a solution of three parts of 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts should be wiped over with a damp cloth wrung out in plain water.
Declaration of conformity
This product fulfils all relevant requirements in European Regulation (EU) 2017/745 on medical devices in risk class I. This product is considered to be an accessory for a medical device, as it is not itself a medical device, but is intended to be used together with several particular medical devices to specifically enable the medical devices to be used in accordance with their intended purposes.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for PLUS wall track, 70.9"
GTIN-13 5708590305813
ETIM EC010050
HMI 71743
NRF 7501017
VVS 615841118
EAN 5708590305813
ETIM EC010050
HMI 71743
NRF 7501017
VVS 615841118
EAN 5708590305813
Item number
R9818112
Previous version
R9905
Product group
Wall tracks
Product
PLUS wall track, 70.9"
Product description
PLUS wall tracks are used for mounting of support arms, shower seats and sink brackets, and allows sideways adjustment of these products.
See below a selection of products for fitting to the wall track.
See below a selection of products for fitting to the wall track.
Description
PLUS wall track, 70.9", for horizontal mounting.
The cover plate hides bolts, wires and simplifies cleaning.
Materials: Aluminium and polystyrene.
Excl. mounting kit.
The cover plate hides bolts, wires and simplifies cleaning.
Materials: Aluminium and polystyrene.
Excl. mounting kit.
Color
Anthracite gray
Designer
Rasmus Thygesen
Design year
2011
Materials
The wall track is primarily made of 10-micrometer anodized aluminium. The cover plate is made of polystyrene and the ends of the track are capped with ABS polymer.
Ergonomy
The track distributes the weight of the individual bathroom product, for example a sink bracket, along its entire length. The products can be adjusted and locked on to the track with intuitive locking functions.
Features
The horizontal track makes it possible to shift the product along the wall to generate extra space as needed. The front cover plate conceals mounting bolts and any cables.
Product capacity
Maximum load: Up to 2200 lbs. depending on the wall type.
Dimensioned drawing, inch
Adjustability
Fixed mounting
Sales unit
pcs
Weight
9.68 lbs
Gross weight
10.74 lbs
Weight per crate
10.74 lbs
Crates per pallet
56
Qty per crate
1
Qty per pallet
56
Cleaning
This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
CaviCide
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that water deposits (Calcium, lime etc.) be removed from wall tracks and other aluminum parts using a solution of three parts of 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts should be wiped over with a damp cloth wrung out in plain water.
Declaration of conformity
This product fulfils all relevant requirements in European Regulation (EU) 2017/745 on medical devices in risk class I. This product is considered to be an accessory for a medical device, as it is not itself a medical device, but is intended to be used together with several particular medical devices to specifically enable the medical devices to be used in accordance with their intended purposes.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Water seal kit
GTIN-13 5708590224800
ETIM EC010195
NBS N13:30,335
NRF 6132519
VVS 747472910
EAN 5708590224800
ETIM EC010195
NBS N13:30,335
NRF 6132519
VVS 747472910
EAN 5708590224800
Item number
R2058
Product group
Flexible feed and waste systems
Product
Water seal kit
Product description
Water seal kit. For use with MATRIX/PLUS sink brackets.
Description
Water seal kit. For use with MATRIX/PLUS sink brackets.
Sales unit
pcs
Weight
0.32 lbs
Gross weight
0.47 lbs
Weight per crate
0.47 lbs
Crates per pallet
125
Qty per crate
1
Qty per pallet
125
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
PLUS grab bar combination for shower, 39.4" x 42.9"
Product no.: RT144000
Multiple variants
Specifications for PLUS grab bar combination for shower, 39.4" x 42.9"
GTIN-13 5708590247649
ETIM EC010140
GMDN 35586
HMI 42068
NBS N13:436
NRF 6311235
RSK 8180962
UNSPSC 42211608
VVS 777569700
EAN 5708590247649
ETIM EC010140
GMDN 35586
HMI 42068
NBS N13:436
NRF 6311235
RSK 8180962
UNSPSC 42211608
VVS 777569700
EAN 5708590247649
Item number
RT144000
Product group
Grab bars
Product
PLUS grab bar combination for shower, 39.4" x 42.9"
Product description
PLUS grab bars are high-quality products and they can be combined in countless ways and they provide the final touch to furnishing a functional and flexible bathroom. A reliable solution with many different options, which can easily lay the grounds for increased independence.
Description
PLUS grab bar combination for shower, A: 39.4" x B: 42.9".
Compatible with RT600 shower holder.
Material: Powder-coated aluminium and plastic.
Excl. mounting kit.
Compatible with RT600 shower holder.
Material: Powder-coated aluminium and plastic.
Excl. mounting kit.
Color
White
Intended use
PLUS grab bar solutions are intended as a support for walking and standing users in the bathroom or for assisting seated users who need help getting up.
Expected service life is 10 years.
Expected service life is 10 years.
Materials
Core material: Aluminium
Surface material: Polyester lacquer
Cover cap: Cycoloy plastic
Strap: Nylon (PA)
Surface material: Polyester lacquer
Cover cap: Cycoloy plastic
Strap: Nylon (PA)
Product capacity
Maximum load: 440 lbs.
When the grab bar is loaded with 440 lbs, each wall fastener is loaded with 123 lbs.
Grab bars are tested with a 1.5 safety factor in accordance with the requirements in ISO 17966:2016.
When the grab bar is loaded with 440 lbs, each wall fastener is loaded with 123 lbs.
Grab bars are tested with a 1.5 safety factor in accordance with the requirements in ISO 17966:2016.
Dimensioned drawing, inch
Sales unit
pcs
Weight
6.21 lbs
Gross weight
7.91 lbs
Weight per crate
7.91 lbs
Crates per pallet
48
Qty per crate
1
Qty per pallet
48
Cleaning
This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
Sprit (husholdningssprit)
Suma Bac D10
Virkon
Rodalon Desinfektionsspray
Lysoformin Spezial
CaviCide
Sufanios Premium
Tvättsprit 70%
NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200
Milizid Citro
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that water deposits (Calcium, lime etc.) be removed from wall tracks and other aluminum parts using a solution of three parts of 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts should be wiped over with a damp cloth wrung out in plain water.
Declaration of conformity
This product is in compliance with all relevant requirements of regulation (EU) 2017/745 on medical devices.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Shower faucet bracket
GTIN-13 5708590314723
ETIM EC004580
HMI 88814
NBS N13:40,375
NRF 6311293
VVS 615859760
EAN 5708590314723
ETIM EC004580
HMI 88814
NBS N13:40,375
NRF 6311293
VVS 615859760
EAN 5708590314723
Item number
RT760
Product group
Shower accessories
Product
Shower faucet bracket
Product description
Pressalit offers a selection of bath and toilet accessories developed especially for mounting on different PLUS products
Description
Shower faucet bracket, incl. 17.9'' feed pipes.
With locking handle.
Sideways adjustable on PLUS walltrack for easy access anywhere in the bathroom
With locking handle.
Sideways adjustable on PLUS walltrack for easy access anywhere in the bathroom
Materials
Aluminium, plastics, steel-braided hoses
Ergonomy
The moveable shower faucet bracket makes it possible to position the hand shower and shower faucet as required.
Features
Outside the shower zone, the unit can be used beside the sink for washing hair or at the toilet as a bidet function.
Dimensioned drawing, inch
Sales unit
pcs
Weight
7.23 lbs
Gross weight
7.98 lbs
Weight per crate
7.98 lbs
Qty per crate
1
Qty per pallet
0
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
PLUS sink bracket with lever control, height adjustable with pneumatic cylinder and manually horizontally adjustable
Product no.: R4680
Multiple variants
Specifications for PLUS sink bracket with lever control, height adjustable with pneumatic cylinder and manually horizontally adjustable
GTIN-13 5708590309446
ETIM EC010187
FDA ILW/D142473
GMDN 63052
HMI 71757
NBS N13:30,335
NRF 6132533
RSK 7972591
UNSPSC 42211600
VVS 654002200
EAN 5708590309446
ETIM EC010187
FDA ILW/D142473
GMDN 63052
HMI 71757
NBS N13:30,335
NRF 6132533
RSK 7972591
UNSPSC 42211600
VVS 654002200
EAN 5708590309446
Item number
R4680
Previous version
R4760
Product group
Sink brackets
Product
PLUS sink bracket with lever control, height adjustable with pneumatic cylinder and manually horizontally adjustable
Product description
PLUS sink brackets are available in electrically, pneumatically and manually height adjustable versions.
They are suitable for wall-mounting or for fitting to Pressalit PLUS wall tracks.
They are suitable for wall-mounting or for fitting to Pressalit PLUS wall tracks.
Description
PLUS sink bracket, pneumatic-assisted. The lever control is placed at the front of the sink. The lever control can also be used as a towel rail and can be placed on either side of the sink. Manually height adjustable by 11.8" (stepless) and adjustable horizontally. Recommendation: Flexible feed and waste system R2084/R2085/R2087.
Materials: Aluminium and ABS polymer.
Incl. mounting bolts for sink. For mounting on horizontal wall track (not included).
Materials: Aluminium and ABS polymer.
Incl. mounting bolts for sink. For mounting on horizontal wall track (not included).
Mounting instructions
For fitting to horizontal PLUS wall track (not included).
Intended use
A sink bracket is intended for optimum ergonomics at a wash basin, for both seated and standing users with disabilities.
Expected service life is 10 years, provided that maintenance is carried out as described in the user manual.
Expected service life is 10 years, provided that maintenance is carried out as described in the user manual.
Designer
Rasmus Thygesen
Design year
2011
Materials
The sink bracket is primarily made of 3/8" anodized aluminium. The ends of the bracket cover are capped with ABS polymer. The bracket is available with a lever control consisting of an ABS polymer switch at the end of an anodized aluminium arm
Ergonomy
The height of the sink is easily adjusted the lever control. The sink bracket is compatible with all types of bolt-mounted sink. It's rounded, sleek design makes it easy to clean thoroughly.
Features
The arm that holds the lever control can function as a towel bar. The lever control can be placed on the right- or left-hand side of the sink. This sink bracket is supplied as standard with a pneumatic cylinder for sinks weighing 35.3-48.5 lbs, however, it is possible to order it for sinks weighing 17.6-26.5 lbs or 26.5-35.3 lbs.
Product capacity
Maximum load: 298 lbs.
Suitable for sinks weighing no more than 49 lbs.
When the sink is loaded with 298 lbs, each wall fastener will be carrying 66 lbs.
Sink brackets need to be able to carry the weight of the sink, as well as support the weight of the person who is leaning against the sink or who is using the sink to rise from seated position.
Neither sink nor sink bracket are intended to carry the full body weight of a person, and the test methods applicable to sink brackets reflect this: ISO 17966 prescribes a static test on the front edge of the sink at 75% of maximum user weight, i.e. when the maximum load on a sink bracket is given as 298 lbs and the wash basin weighs 49 lbs, it is – according to ISO 17966 – the equivalent of a user weighing 332 lbs leaning on the front edge of the wash basin.
Suitable for sinks weighing no more than 49 lbs.
When the sink is loaded with 298 lbs, each wall fastener will be carrying 66 lbs.
Sink brackets need to be able to carry the weight of the sink, as well as support the weight of the person who is leaning against the sink or who is using the sink to rise from seated position.
Neither sink nor sink bracket are intended to carry the full body weight of a person, and the test methods applicable to sink brackets reflect this: ISO 17966 prescribes a static test on the front edge of the sink at 75% of maximum user weight, i.e. when the maximum load on a sink bracket is given as 298 lbs and the wash basin weighs 49 lbs, it is – according to ISO 17966 – the equivalent of a user weighing 332 lbs leaning on the front edge of the wash basin.
Dimensioned drawing, inch
Adjustability
Vertical and horizontal adjustable
Adjustment height
11.82 inch
Maximum user weight (MUM)
333 lbs
Maximum load (SWL)
298 lbs
Sales unit
pcs
Weight
29.76 lbs
Gross weight
33.77 lbs
Weight per crate
33.77 lbs
Crates per pallet
10
Qty per crate
1
Qty per pallet
10
Cleaning
This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
Sprit (husholdningssprit)
Suma Bac D10
Virkon
Rodalon Desinfektionsspray
Lysoformin Spezial
CaviCide
Sufanios Premium
Tvättsprit 70%
NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200
Milizid Citro
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that water deposits (Calcium, lime etc.) be removed from wall tracks and other aluminum parts using a solution of three parts of 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts should be wiped over with a damp cloth wrung out in plain water.
Declaration of conformity
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Soap holder
GTIN-13 5708590333755
ETIM EC010557
HMI 88858
NRF 6311237
VVS 777564500
EAN 5708590333755
ETIM EC010557
HMI 88858
NRF 6311237
VVS 777564500
EAN 5708590333755
Item number
RT190000
Product group
Storage and accessories
Product
Soap holder
Product description
Soap holder for grab bars
Description
Soap holder for grab bars
Color
White
Materials
Nylon (PA6)
Dimensioned drawing, inch
Sales unit
pcs
Weight
0.47 lbs
Gross weight
0.73 lbs
Weight per crate
8.76 lbs
Crates per pallet
16
Qty per crate
12
Qty per pallet
192
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for MATRIX SMALL sink without overflow
GTIN-13 5708590325071
ETIM EC011550
HMI 82611
NBS N13:30,335
NRF 6132502
RSK 7503000
UNSPSC 30181504
VVS 636857000
EAN 5708590325071
ETIM EC011550
HMI 82611
NBS N13:30,335
NRF 6132502
RSK 7503000
UNSPSC 30181504
VVS 636857000
EAN 5708590325071
Item number
R2021000
Product group
Sinks
Product
MATRIX SMALL sink without overflow
Product description
MATRIX is a series of sinks, most of them are designed by Pressalit.
MATRIX SMALL and CURVE sinks fit onto PLUS, SELECT and VALUE sink brackets, whereas MATRIX MEDIUM and ANGLE are tailor made to fit specific brackets.
MATRIX SMALL and CURVE sinks fit onto PLUS, SELECT and VALUE sink brackets, whereas MATRIX MEDIUM and ANGLE are tailor made to fit specific brackets.
Description
MATRIX SMALL sink, 22.6" x 17.7" x 5.1'', with two integrated grab handles in the front. With tap hole diameter 1.4", without overflow. Incl. drain fitting. The sink has raised edges, preventing water from running over the back or down the outer sides.
Materials: Cultured marble with a high-polished, nonporous sanitary gel coating.
Compatible with sink brackets from the Pressalit PLUS and SELECT ranges.
Materials: Cultured marble with a high-polished, nonporous sanitary gel coating.
Compatible with sink brackets from the Pressalit PLUS and SELECT ranges.
Mounting instructions
Excl. mounting kit. See Technical specifications (pdf) for information on mounting kits suitable for various wall types.
Color
White
Design year
2013
Materials
Cultured marble with a high-polished, nonporous sanitary gel coating.
Product capacity
440 lbs.
Sales unit
pcs
Weight
46.3 lbs
Gross weight
50.71 lbs
Weight per crate
50.71 lbs
Crates per pallet
10
Qty per crate
1
Qty per pallet
10
Cleaning
For cleaning the wash basin, use hot water and a mild soapy cleaning agent. Make sure that the product is wiped down with a soft rag wrung out in clear water immediately after cleaning.
For disinfecting the wash basin, the following agents can be used:
Sodium hydroxide 5%
Acetic acid solution 10%
Ethanol solution 70%
Sodium hypochlorite 5%, active chlorine
Sodium chloride 170g/l, diluted to 50%.
Make sure that the product is wiped down with a soft rag wrung out in clear water immediately after disinfection.
NB! Do not use abrasive cleaning agents, as this will cause damage to the surface of the wash basin.
For disinfecting the wash basin, the following agents can be used:
Sodium hydroxide 5%
Acetic acid solution 10%
Ethanol solution 70%
Sodium hypochlorite 5%, active chlorine
Sodium chloride 170g/l, diluted to 50%.
Make sure that the product is wiped down with a soft rag wrung out in clear water immediately after disinfection.
NB! Do not use abrasive cleaning agents, as this will cause damage to the surface of the wash basin.
Declaration of conformity
Declaration of Performance
Compliance criteria according to EN 14688:2015.
4.1 Load resistance: stable, without cracks or deformations.
4.2 Draining of water: Water drained away completely.
4.3 Resistance to temperature changes: Without cracks, delaminations.
4.4 Resistance to chemicals and staining agents:
- Sodium hydroxide 5% - without staining or deterioration;
- Acetic acid solution 10% - without staining or deterioration;
- Ethanol sol. 70% - without staining or deterioration;
- Sodium hypochlorite 5% active chlorine - without staining or deterioration;
- Sodium chloride 170g/l diluted to 50% - without staining or deterioration.
4.5 Surface stability / resistance to scratching: Do not use abrasives on the surface.
4.6 Cleanability: Smooth, non-absorbant surfaces.
4.7 Protection against overflowing: CL 00.
4.8 Durability: Product is considered durable.
Compliance criteria according to EN 14688:2015.
4.1 Load resistance: stable, without cracks or deformations.
4.2 Draining of water: Water drained away completely.
4.3 Resistance to temperature changes: Without cracks, delaminations.
4.4 Resistance to chemicals and staining agents:
- Sodium hydroxide 5% - without staining or deterioration;
- Acetic acid solution 10% - without staining or deterioration;
- Ethanol sol. 70% - without staining or deterioration;
- Sodium hypochlorite 5% active chlorine - without staining or deterioration;
- Sodium chloride 170g/l diluted to 50% - without staining or deterioration.
4.5 Surface stability / resistance to scratching: Do not use abrasives on the surface.
4.6 Cleanability: Smooth, non-absorbant surfaces.
4.7 Protection against overflowing: CL 00.
4.8 Durability: Product is considered durable.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Universal basket, 12.8" x 4.6" x 5.3"
GTIN-13 5708590156262
ETIM EC011190
HMI 124564
NBS N13:449
NRF 7501032
VVS 615801765
EAN 5708590156262
ETIM EC011190
HMI 124564
NBS N13:449
NRF 7501032
VVS 615801765
EAN 5708590156262
Item number
RT765
Product group
Storage and accessories
Product
Universal basket, 12.8" x 4.6" x 5.3"
Product description
Universal basket, A:12.8" x B:4.6" x C:5.3" .
Description
Universal basket, A:12.8" x B:4.6" x C:5.3"
Mounting instructions
For fitting to horizontal PLUS wall track (not included).
Materials
Core material: Steel
Surface material: Rilsan
Surface material: Rilsan
Sales unit
pcs
Weight
1.34 lbs
Gross weight
1.68 lbs
Weight per crate
1.68 lbs
Crates per pallet
75
Qty per crate
1
Qty per pallet
75
Cleaning
This product should be cleaned with hot water or a mild cleaning solution.
Do not use corrosive or abrasive cleaners as it may result in the surface being damaged.
For surface disinfection, chlorine-based disinfectants may be used according to the product specification and safety precautions for these products.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
Sprit (husholdningssprit)
Suma Bac D10
Virkon
Rodalon Desinfektionsspray
Lysoformin Spezial
CaviCide
Sufanios Premium
Tvättsprit 70%
WipeClean UniversalCleaning
Chrolorine Disinfection Wipes
Klorilli (Kiilto Clean)
NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200
Milizid Citro
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Mirror 23.6" x 39.4" with mirror fittings
GTIN-13 5708590237442
ETIM EC010550
NBS N13:438
NRF 7501044
RSK 7972513
UNSPSC 52171002
VVS 777553001
EAN 5708590237442
ETIM EC010550
NBS N13:438
NRF 7501044
RSK 7972513
UNSPSC 52171002
VVS 777553001
EAN 5708590237442
Item number
RT924
Product group
Mirror and mirror holder
Product
Mirror 23.6" x 39.4" with mirror fittings
Product description
Mirror 23.6" x 39.4" x 0.2", including 4 mirror fittings
Incl. mounting kit for brick wall.
Incl. mounting kit for brick wall.
Description
Mirror 23.6" x 39.4" x 0.2", including 4 mirror fittings
Incl. mounting kit for brick wall.
Incl. mounting kit for brick wall.
Materials
Mirror: Glass
Mirror fittings:
Core material: Brass
Surface material: 912 matt chrome
Mirror fittings:
Core material: Brass
Surface material: 912 matt chrome
Sales unit
pcs
Weight
17.07 lbs
Gross weight
20.6 lbs
Weight per crate
20.6 lbs
Crates per pallet
20
Qty per crate
1
Qty per pallet
20
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Paper holder for PLUS fold down grab bar
GTIN-13 5708590314679
ETIM EC010553
HMI 71813
NBS N13:436
NRF 6190665
UNSPSC 30181610
VVS 615859100
EAN 5708590314679
ETIM EC010553
HMI 71813
NBS N13:436
NRF 6190665
UNSPSC 30181610
VVS 615859100
EAN 5708590314679
Item number
R9321
Product group
Fold down grab bars and arm supports
Product
Paper holder for PLUS fold down grab bar
Product description
Paper holder, for mounting to underside of PLUS fold down grab bar.
Description
Paper holder, for mounting to underside of PLUS support arm.
Mounting instructions
Mounting material included.
Materials
Aluminium
Sales unit
pcs
Weight
0.56 lbs
Gross weight
0.57 lbs
Weight per crate
0.57 lbs
Qty per crate
1
Qty per pallet
0
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for PLUS shower head holder
GTIN-13 5708590169965
ETIM EC010132
HMI 42227
NBS N13:40,375
NRF 6191674
RSK 8180966
VVS 777564700
EAN 5708590169965
ETIM EC010132
HMI 42227
NBS N13:40,375
NRF 6191674
RSK 8180966
VVS 777564700
EAN 5708590169965
Item number
RT600000
Product group
Shower accessories
Product
PLUS shower head holder
Product description
Shower head holder for placing on vertical grab bars.
Description
Shower head holder for placing on vertical grab bars.
Mounting instructions
Mounting material included.
Color
White
Materials
Polycarnonate (PC) and ABS plastic
Ergonomy
Easy height adjustment with one hand or hands with little strength.
Features
For mounting on grab bars with a diameter of 1.3"
Sales unit
pcs
Weight
0.26 lbs
Gross weight
0.44 lbs
Weight per crate
0.44 lbs
Crates per pallet
125
Qty per crate
1
Qty per pallet
125
Cleaning
This product should be cleaned with hot water or a mild cleaning solution. Do not use chlorine based or corrosive cleaners as it may result in the surface being damaged.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Wall-mounted toilet 27 4/8"
GTIN-13 5708590345284
ETIM EC011289
HMI 105700
NRF 6191026
UNSPSC 30181505
VVS 612928000
EAN 5708590345284
ETIM EC011289
HMI 105700
NRF 6191026
UNSPSC 30181505
VVS 612928000
EAN 5708590345284
Item number
R2099000
Product group
Toilets
Product
Wall-mounted toilet 27 4/8"
Product description
Toilet, wall-mounted, distance from wall to the front: 27 4/8"
Excl. mounting kit.
For mounting directly on wall, a mounting kit from V&B must be ordered from Pressalit at an additional cost. For mounting on built-in cistern or Pressalit toilet lifter, mounting kit is included in the delivery.
Excl. mounting kit.
For mounting directly on wall, a mounting kit from V&B must be ordered from Pressalit at an additional cost. For mounting on built-in cistern or Pressalit toilet lifter, mounting kit is included in the delivery.
Description
Toilet, wall-mounted, distance from wall to the front: 27 4/8".
Excl. mounting kit.
Excl. mounting kit.
Color
White
Materials
Sanitary porcelain
Ergonomy
27 4/8" is recommended for wheelchair users as it provides sufficient space for a caregiver.
Wall mounted toilet makes mounting possible at individual height. Leaves space for foot support, the legs of a floor lift, and the caregiver's feet.
Wall mounted toilet makes mounting possible at individual height. Leaves space for foot support, the legs of a floor lift, and the caregiver's feet.
Product capacity
Max load: 880 lbs.
Sales unit
pcs
Weight
48.5 lbs
Gross weight
48.5 lbs
Weight per crate
48.5 lbs
Crates per pallet
12
Qty per crate
1
Qty per pallet
12
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Shower faucet with thermostat and black operating levers easy to handle
Product no.: RT640
Multiple variants
Specifications for Shower faucet with thermostat and black operating levers easy to handle
GTIN-13 5708590211824
ETIM EC011329
HMI 35288
NBS N13:40,375
NRF 6311291
RSK 8344043
UNSPSC 30181702
VVS 719015604
EAN 5708590211824
ETIM EC011329
HMI 35288
NBS N13:40,375
NRF 6311291
RSK 8344043
UNSPSC 30181702
VVS 719015604
EAN 5708590211824
Item number
RT640
Product group
Shower accessories
Product
Shower faucet with thermostat and black operating levers easy to handle
Product description
Shower faucet with thermostat and black operating levers easy to handle.
VA-approved (Denmark).
VA-approved (Denmark).
Description
Shower faucet with thermostat and black operating levers easy to handle.
VA-approved (Denmark).
VA-approved (Denmark).
Materials
Core material: brass
Protective cover: plastic
Handles: plastic
Protective cover: plastic
Handles: plastic
Ergonomy
Design and contrasting color of the operating handles make the "wing-shaped" handles easy to see and to use.
Features
The Shower faucet is heat insulated.
Can be mounted on the Shower faucet bracket RT760.
Can be mounted on the Shower faucet bracket RT760.
Dimensioned drawing, inch
Sales unit
pcs
Weight
3.81 lbs
Gross weight
4.16 lbs
Weight per crate
4.16 lbs
Crates per pallet
100
Qty per crate
1
Qty per pallet
100
Cleaning
This product should be cleaned with hot water or a mild cleaning solution. Do not use chlorine based or corrosive cleaners as it may result in the surface being damaged.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Pressalit A/S
Pressalitvej 1
DK-8680 Ry
Danmark
T +45 8788 8788
E pressalit@pressalit.com
Pressalit Inc.
T +1 317 494 2889
E us@pressalit.com
