Rehab facility
Highlights
Effective rehabilitation often requires exercising specific or targeted areas of the body. This could mean that someone purposefully uses one side of their body, left or right for example, in order to retrain and repair damaged muscles and nerve pathways. It is therefore essential for bathroom facilities to adapt, and solutions found that would position equipment in such a way that assists and promotes rehabilitation.
Best results are achieved with flexible bathroom arrangements using Pressalit’s track mounted PLUS products. Supportive items such as hinged arms and shower chairs can be moved left and right on the horizontal wall tack or moved to another area of the bathroom altogether.
A good illustration is the shower, which is usually found in the corner of a bathroom because of drainage. When corners are used, the shower chair will be on one wall and the shower taps and controls adjacent on the other wall. Any transfer on and off the shower seat will be either left or right handed and the use of the taps will be predominantly set up for left or right sided use as well.
Track mounted shower chairs and shower taps can be easily swapped around to provide left or right sided set ups as required, effectively changing the bathroom arrangement to suit individual requirements. Bathroom products that are fixed and do not change position will not provide such an effective solution for rehabilitation.
An opening shower curtain rail should also be included in the arrangement to allow access for ceiling and mobile hoists.
Products in this suggestion
Specifications for Pressalit Choice Toilet brush for wall, polished steel
ETIM EC010555
NRF 6190943
RSK 8714260
UNSPSC 47131608
VVS 778497240
Elegant toilet brush for wall mounting. Opens up extra space on the floor.
Specifications for PLUS wall track, 1800 mm
ETIM EC010050
HMI 71743
NRF 7501017
VVS 615841118
See below a selection of products for fitting to the wall track.
The cover plate hides bolts and wires and facilitates cleaning.
Materials: Aluminium and polystyrene.
See below a selection of products for fitting to the wall track.
Excl. mounting kit.
PLUS wall tracks
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
Sprit (husholdningssprit)
Suma Bac D10
Virkon
Rodalon Desinfektionsspray
Lysoformin Spezial
CaviCide
Sufanios Premium
Tvättsprit 70%
NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200
Milizid Citro
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
Specifications for PLUS support arm with integrated counter-balance, 850 mm, left hand operated
ETIM EC010078
FDA ILS/D135866
GMDN 35585
HMI 125890
NRF 6191162
UNSPSC 42211612
Suitable for use with toilet pans projecting 700 mm or floor standing toilets.
Replaces discontinued models R3575 og RF575.
Materials: The arms are constructed of 10-micrometre anodized aluminium, with a non-slip gripping surface made of soft SEBS incorporating a glass-reinforced nylon core
For fitting to horizontal PLUS wall track (not included).
Expected service life is 10 years, provided that maintenance is carried out as described in the user manual.
The hinge arm is also made of soft SEBS.
Internal components and fasteners are primarily made of stainless steel.
The hinge barrel is capped with ABS polymer.
The end of the support arm is enlarged so that it is easier to pull forward from a sitting position and also provides a clear sense of where the support arm ends.
Soft and slip-resistant material that has a warm feel.
The underside is shaped for the mounting of various accessories.
When the support arm is loaded with 150 kg, each wall fastener in the horizontal wall track is loaded with 44 kg.
PLUS support arms have been tested statically with 700 kg (close to the wall), 425 kg (in the middle) and 225 kg (the outermost point).
PLUS support arms
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
Sprit (husholdningssprit)
Suma Bac D10
Virkon
Rodalon Desinfektionsspray
Lysoformin Spezial
CaviCide
Sufanios Premium
Tvättsprit 70%
Oxyplus-acid 2% (Diversey)
WipeClean UniversalCleaning
Chrolorine Disinfection Wipes
NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200
Milizid Citro
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
Intended use
The support arm is used as a support for sitting down or getting up from a toilet, or for sideways transfer from a wheelchair.
Operating environment
For indoor use in a wet environment, such as a bathroom or a washroom, in private homes, nursing homes and hospitals.
For institutional use, the expected life time is 10 years.
Life cycle test performed according to ISO 17966:2016.
For maintenance, please refer to user guide, which is enclosed with the product, and which can also be found on the website under "Downloads".>
Specifications for MATRIX powered basin unit, height adjustable
ETIM EC010187
GMDN 63054
UNSPSC 42211600
They are available in electrically and manually height adjustable and sideways adjustable versions, as well as fixed versions, all of them with a hygienic cover to conceal the plumbing installations.
Electrically height adjustable 200 mm with operating buttons in front edge of wash basin.
Incl. fixing bolts for wash basin (Can only be used with MATRIX MEDIUM wash basins, R2122/R2123).
Materials: Powder-coated stainless steel and PMMA.
Excl. mounting kit.
Expected service life is 10 years, provided that maintenance is carried out as described in the user manual.
Maximum load (SWL): 150 kg.
Suitable for wash basins weighing no more than 25 kg.
When the wash basin is loaded with 150 kg, each wall fastener will be carrying 60 kg.
Wash basin brackets need to be able to carry the weight of the wash basin, as well as support the weight of the person who is leaning against the wash basin or who is using the wash basin to rise from seated position.
Neither wash basin nor wash basin bracket are intended to carry the full body weight of a person, and the test methods applicable to wash basin brackets reflect this: ISO 17966 prescribes a static test on the front edge of the wash basin at 75% of maximum user weight, i.e. when the maximum load on a wash basin bracket is given as 150 kg and the wash basin weighs 25 kg, it is – according to ISO 17966 – the equivalent of a user weighing 167 kg leaning on the front edge of the wash basin.
VALUE & MATRIX wash basin brackets
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use corrosive or abrasive cleaners as it may result in the surface being damaged.
For surface disinfection, chlorine-based disinfectants may be used according to the product specification and safety precautions for these products.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
Sprit (husholdningssprit)
Suma Bac D10
Virkon
Rodalon Desinfektionsspray
Lysoformin Spezial
CaviCide
Sufanios Premium
Tvättsprit 70%
NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200
Milizid Citro
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
- Medical Device Regulation (MDR) 2002 on medical devices.
- Supply of Machinery (Safety) Regulations 2008
- Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
Specifications for Shower mixer bracket
ETIM EC004580
HMI 88814
NBS N13:40,375
NRF 6311293
VVS 615859760
With locking handle.
Sideways adjustable on PLUS walltrack for easy access anywhere in the bathroom
Specifications for MATRIX MEDIUM wash basin with overflow, for powered basin unit
ETIM EC011550
HMI 105903
NRF 6132439
UNSPSC 30181504
VVS 639863100
MATRIX SMALL and CURVE wash basins fit onto PLUS, SELECT and VALUE wash basin brackets, whereas MATRIX MEDIUM, ANGLE, ANGLE DEEP and SQUARE are tailor made to fit specific brackets.
Drain fitting must be bought separately.
The wash basin has raised edges, preventing water from running over the back or down the outer sides.
Materials: Cultured marble with a high-polished, pore-free sanitary gel coating.
Suitable for mounting on MATRIX powered basin unit R4822 (UK R4827).
Wash basin
For cleaning the wash basin, use hot water and a mild soapy cleaning agent. Make sure that the product is wiped down with a soft rag wrung out in clear water immediately after cleaning.
For disinfecting the wash basin, the following agents can be used:
Sodium hydroxide 5%
Acetic acid solution 10%
Ethanol solution 70%
Sodium hypochlorite 5%, active chlorine
Sodium chloride 170g/l, diluted to 50%.
Make sure that the product is wiped down with a soft rag wrung out in clear water immediately after disinfection.
NB! Do not use abrasive cleaning agents, as this will cause damage to the surface of the wash basin.
Compliance criteria according to EN 14688:2015.
4.1 Load resistance: stable, without cracks or deformations.
4.2 Draining of water: Water drained away completely.
4.3 Resistance to temperature changes: Without cracks, delaminations.
4.4 Resistance to chemicals and staining agents:
- Sodium hydroxide 5% - without staining or deterioration;
- Acetic acid solution 10% - without staining or deterioration;
- Ethanol sol. 70% - without staining or deterioration;
- Sodium hypochlorite 5% active chlorine - without staining or deterioration;
- Sodium chloride 170g/l diluted to 50% - without staining or deterioration.
4.5 Surface stability / resistance to scratching: Do not use abrasives on the surface.
4.6 Cleanability: Smooth, non-absorbant surfaces.
4.7 Protection against overflowing: CL 10.
4.8 Durability: Product is considered durable.
Specifications for PLUS support arm with integrated counter-balance, 850 mm, right hand operated
ETIM EC010078
FDA ILS/D135866
GMDN 35585
HMI 123656
NRF 6191173
UNSPSC 42211612
Suitable for use with toilet pans projecting 700 mm or floor standing toilets.
Replaces discontinued models R3585 og RF585.
Materials: The arms are constructed of 10-micrometre anodized aluminium, with a non-slip gripping surface made of soft SEBS incorporating a glass-reinforced nylon core
For fitting to horizontal PLUS wall track (not included).
Expected service life is 10 years, provided that maintenance is carried out as described in the user manual.
The hinge arm is also made of soft SEBS.
Internal components and fasteners are primarily made of stainless steel.
The hinge barrel is capped with ABS polymer.
The end of the support arm is enlarged so that it is easier to pull forward from a sitting position and also provides a clear sense of where the support arm ends.
Soft and slip-resistant material that has a warm feel.
The underside is shaped for the mounting of various accessories.
When the support arm is loaded with 150 kg, each wall fastener in the horizontal wall track is loaded with 44 kg.
PLUS support arms have been tested statically with 700 kg (close to the wall), 425 kg (in the middle) and 225 kg (the outermost point).
PLUS support arms
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
Sprit (husholdningssprit)
Suma Bac D10
Virkon
Rodalon Desinfektionsspray
Lysoformin Spezial
CaviCide
Sufanios Premium
Tvättsprit 70%
Oxyplus-acid 2% (Diversey)
WipeClean UniversalCleaning
Chrolorine Disinfection Wipes
NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200
Milizid Citro
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
Intended use
The support arm is used as a support for sitting down or getting up from a toilet, or for sideways transfer from a wheelchair.
Operating environment
For indoor use in a wet environment, such as a bathroom or a washroom, in private homes, nursing homes and hospitals.
For institutional use, the expected life time is 10 years.
Life cycle test performed according to ISO 17966:2016.
For maintenance, please refer to user guide, which is enclosed with the product, and which can also be found on the website under "Downloads".>
Specifications for SCT 3000 shower change table, electrically height adjustable
ETIM EC010457
GMDN 43600
HMI 130164
UNSPSC 42211601
VVS 777543493
These tables can be used in schools, institutions, hospitals and private homes and are all designed to be durable, comfortable and easy to clean.
The design and flexibility of the tables ensures optimal working conditions for the carer as well as a high level of comfort and safety for the user.
The SCT 3000 series has a stylish and award-winning design focused on comfort and ease of use.
Foldable. Incl. safety rail, flexible hose (Ø32 mm) and water collection tray with integrated outlet.
Surface length 1800 mm, outer measurements 1057 mm x 1910 mm.
Excl. mounting kit.
Expected service life is 10 years for institutional use, provided that maintenance is carried out as described in the user manual.
• One hand operated safety rails allows the carer to maintain eye contact as well as physical contact with the user during the whole process.
• Easy to clean, smooth contact surfaces which do not collect dirt and bacteria.
• The slightly curved shape makes the table comfortable and safe to lie on.
• Adjustable neck support which can be moved to either end of the 1800 mm shower and changing tables.
• The integrated gas cylinders enable the table to be folded out of the way when not in use to maximize floor space.
• The powered shower change table is supplied with a wired hand control. The red buttons clearly indicate "up" and "down".
• The wired hand control comes with a practical holder for placement on the wall.
Safe working load (SWL): 237 kg.
When the table is loaded with 227 kg, each mounting bolt supports 29,5 kg
This product has been tested statically with a load of 592,5 kg as the IEC 60601-1 standard requires testing with safety factor 2.5.
SCT 3000
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
Sprit (husholdningssprit)
Suma Bac D10
Virkon
Rodalon Desinfektionsspray
Lysoformin Spezial
CaviCide
Sufanios Premium
Tvättsprit 70%
Accel PREVention Wipes Lingettes
Universal Wipes (Clinell)
Sporidical Wipes (Clinell)
CHLOR-CLEAN Tablets (chemform)
WipeClean Ethanol Disinfection 80% (PLUM)
Wetwipe Ethanol Disinfection 70% (wetwipe)
NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200
Milizid Citro
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
- Regulation (EU) 2017/745 on medical devices
- Council Directive 2006/42/EC on machinery
- Council Directive 2011/65/EC on RoHS. For the UK:
- Medical Device Regulation (MDR) 2002 on medical devices.
- Supply of Machinery (Safety) Regulations 2008
- Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
Specifications for Toilet seat Dania without cover
ETIM EC011526
HMI 108576
NBS N13:300
NRF 6191064
UNSPSC 42211614
VVS 615678035
Strap: Stainless steel V2A
Spira
Spira, høj , lukket S-lås, rimfree
Cera væghængt
Saval Pro
O.Novo rimfree
Omnia Classic
R2099
Specifications for Shower head with normal jet
ETIM EC010161
HMI 42225
VVS 738525540
Specifications for PLUS shower head holder
ETIM EC010132
HMI 42227
NBS N13:40,375
VVS 777564735
Specifications for Mirror 600 x 1000 mm with mirror fittings
ETIM EC010550
NBS N13:438
NRF 7501044
RSK 7972513
UNSPSC 52171002
VVS 777553001
Incl. mounting kit for brick wall.
Incl. mounting kit for brick wall.
Mirror fittings:
Basic material: Brass
Surface material: 912 matt chrome
Specifications for Shower curtain 1800 mm x 2000 mm, 2 pcs
ETIM EC010492
HMI 42203
NBS N13:375
NRF 6311241
VVS 777471510
Specifications for Paper holder for PLUS support arm
ETIM EC010553
HMI 71813
NBS N13:436
NRF 6190665
UNSPSC 30181610
VVS 615859100
Specifications for PLUS shower seat 450, manually height and manually sideways adjustable
ETIM EC010872
FDA INN/D135865
GMDN 34936
HMI 124233
NRF 6317138
UNSPSC 42211610
They are suitable for wall-mounting or for fitting to Pressalit PLUS wall tracks.
Materials: Comfortable polyurethane foam over a plywood core, fitted to an aluminium profile. The non-slip gripping surface of the armrests are made of soft SEBS.
For fitting to horizontal PLUS wall track (not included).
Expected service life of the shower seat is 10 years, provided that maintenance is carried out as described in the instructions for use (OMM).
Maximum load for armrests is 55 kg.
When the seat is loaded with 200 kg, each wall fastener is loaded with 23 kg.
The seat has been tested statically with safety factor 1.5, which is a requirement according to the applied assistive products standards.
PLUS shower seat
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Erisan OXY+
Tvättsprit 70%
CaviCide surface disinfectant decontaminant cleaner
Rodalon Desinfektionsspray
Terralin protect (SCHÜLKE+)
Dismonzon Plus (BODE Chemie GmbH)
NON-DISINFECTANTS:
Wetrok Caledor (Wetrok)
Petrosol Citro (Büfa)
Important: Polyurethane surfaces of PLUS shower seats and PLUS backrests contains an antibacterial surface, which will be compromised if cleaned with anything other than soap and water.
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
Specifications for Safety lock for SCT 1000, 2000 and 3000 shower change tables
ETIM EC010092
VVS 777545982
Specifications for Drain fitting, ring, chain and plug
ETIM EC003867
NRF 6132454
Specifications for PLUS handrail 1000 mm
ETIM EC011028
GMDN 35586
HMI 19085
NBS N13:436
NRF 6317169
UNSPSC 42211608
VVS 777565535
The projection of 50 mm from the wall makes it easy to take hold of the rail.
Inkl. wall rosette, which covers the fixings.
Material: Powder-coated aluminium and plastic
Excl. mounting kit.
Expected service life is 10 years.
Surface material: Polyester lacquer
Cover cap: Cycoloy plastic
When the handrail is loaded with 235 kg, each wall fastener is loaded with 56 kg.
Handrails are tested with a 1.5 safety factor in accordance with the requirements in ISO 17966:2016.
Handrails ALU
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
Sprit (husholdningssprit)
Suma Bac D10
Virkon
Rodalon Desinfektionsspray
Lysoformin Spezial
CaviCide
Sufanios Premium
Tvättsprit 70%
NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200
Milizid Citro
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
- Regulation (EU) 2017/745 on medical devices.
For the UK: - Medical Device Regulation (MDR) 2002 on medical devices.
Specifications for Shower curtain rail, opening version, 1530 x 1530 mm
ETIM EC011493
HMI 32309
NBS N13:375
NRF 6311244
VVS 777271400
Ideal for a room with a ceiling hoist.
Excl. mounting kit.
Ideal for a room with a ceiling hoist.
Excl. mounting kit.
Connectors/rings: Polyoxymethylene plastic (POM)
Specifications for Shower mixer with thermostat and black operating levers easy to handle
ETIM EC011329
HMI 35288
NBS N13:40,375
NRF 6311291
RSK 8344043
UNSPSC 30181702
VVS 719015604
VA-approved (Denmark).
VA-approved (Denmark).
Protective cover: plastic
Handles: plastic
Can be mounted at shower mixer bracket RT760.
Specifications for PLUS wall track, 2100 mm
ETIM EC010050
HMI 71744
NRF 7501018
VVS 615841121
See below a selection of products for fitting to the wall track.
The cover plate hides bolts and wires and facilitates cleaning.
Materials: Aluminium and polystyrene.
See below a selection of products for fitting to the wall track.
Excl. mounting kit.
PLUS wall tracks
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
Sprit (husholdningssprit)
Suma Bac D10
Virkon
Rodalon Desinfektionsspray
Lysoformin Spezial
CaviCide
Sufanios Premium
Tvättsprit 70%
NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200
Milizid Citro
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.